12
"
1 İnç Standart WLL 8,5 Ton Geniş Gövdeli Kelepçeler
1" Standard Bow Shackle with safety screw pin, type JB, WLL 8.5 tons, Anchor Shackle Screw Pin Anchor / Bow Shackles Product Description Bow shackles and anchor shackles are both used interchangeably and refer to a type of shackle with a larger, round “O” shaped bow. On a screw pin bow shackle, a threaded pin is inserted through the ears and tightened down. They are not recommended for permanent or long-term installations. The shackles have a large rounded shape that allows
ISO Karbon Çelik JS D Köstek Vidalı Pim Tipi
3/4" Standard Dee Shackle with safety screw pin, type JS, WLL 4.75 tonne, Chain Shackle Screw Pin Dee Shackles / Chain Shackles Product Description On our screw pin dee shackle, a threaded pin is inserted through the ears and tightened down. The shackles have a large rounded shape that allows them to take loads from many directions without developing significant side load. Dee Shackles, also referred to as Chain Shackles, which have a D-shaped bow that is narrower than Anchor
KB 7/16" Tip WLL 2.7 Ton Emniyetli Yay Kelepçesi Galvanizli Çelik
7/16" Standard Bow Shackle with safety screw pin, type KB, WLL 2.7 tonne, Galvanized Steel Anchor Bow Shackle Screw Pin Anchor / Bow Shackles Product Description On a screw pin bow shackle, a threaded pin is inserted through the ears and tightened down. The screw pin configuration is best for use in applications that are temporary, or require repeated and/or quick connections and disconnections. The shackles have a large rounded shape that allows them to take loads from many
GB / T 16762 Dört Ayaklı Tel Halat Sapan, Döngülerle 32mm Galvanizli Kablo Sapan
32mm Four-leg steel wire rope slings, fibre core, swaged wire rope with Flemish Eye Sleeve and Thimble, equipped with Master Link Four-leg wire rope sling assembly, fibre core, Soft Eye and Eye Sling Description All our four-leg steel wire rope sling assemblies are produced according to our DNV Quality Management Approved System. The sling assemblies with fibre core feature 6 x 37 +FC construction, with 1670MPa in tensile strength. Each leg is a single soft eye wire rope
1 İnç Açık Swage Soket Halat Galvanizli Karbon Çelik
1" Wire Rope Sling with Open Swage Socket (with cotter pin), long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description A swage socket is attached to the end of a wire rope sling by using a hydraulic machine and special dies. Our open design swage socket features a spring pin that can attach wire rope sling to another type of fitting. The socket is forged from high tensile steel, while galvanization ensures its long-term durability. They are available
ASME B30.9 0.5 İnç Açık Swage Soket Tel Halat
1" Open Swage Socket (with cotter pin), End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description Open Swage Socket is an open type swage socket with a spring pin. The socket is forged from high tensile steel, while galvanization ensures its long-term durability. The Open Swage Socket is available for wire rope with a diameter from 6.35mm to 50.8mm. - Reference standard: ASME B30.9 - Our Swage Sockets are recommended used for wire ropes feature 6 x 19
3/8" Tel Halat Sapan Grubu, ASME B30.9 Kapalı Baskı Soketi
3/8" Wire Rope Sling with Closed Swage Socket, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description Swage sockets are used with a swaging machine to terminate wire ropes. This type of socket is more resistant to wire fatigue at the point of connection between the socket and cable, but it does not always have as much break strength efficiency as a spelter socket. The swage socket is attached to the end of a wire rope sling by using a hydraulic
0.75 İnç Tel Halat Son Durdurma, Kapalı Swage Soketi
3/4" Closed Swage Socket, End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description Our Closed Swage Socket is forged from high tensile steel, while galvanization ensures its long-term durability. The Closde Swage Socket is available for wire rope with a diameter from 1/4" to 2". - Reference standard: ASME B30.9 - Our Swage Sockets are recommended used for wire ropes feature 6 x 19, 6 x 25, 6 x 37 construction, with tension strength ranging from 1670
EN 13411-1 9/16" Yüksük Gözlü Tel Halat Sapan Düşük Karbonlu Yumuşak Çelik
9/16" Wire Rope Sling with Standard Thimble Eye, Eye Sling, greater protection against wear and deformation of the wire rope eye Wire Rope Sling and Wire Rope attachment Product Description Our Standard Thimbles are galvanized thimbles according to EN 13411-1 for making a 'hard' eye with wire rope, it creates a loop at wire rope ends. The thimbles provide a means for connecting wire rope to attachments. They are good for light duty rigging applications and ideally suited for
