3 wire rope sling
"
2-1/4" Hafif Çelik Ağır Hizmet Halat Yüksüğü
2-1/4" Heavy Duty Thimble for Wire Rope, rigging accessory, greater protection against wear and deformation of the wire rope eye Wire Rope attachment Description Our galvanized Heavy Duty Thimble provide smooth and even grooves, maximum strength in critical areas, and the proper bending radius for the rope. They are designed for use with high-performance wire rope. All of our thimbles meet the performance requirements of Federal Specification FF-T-276B Type III. The thimble
FF-T-276B 3.5 İnç Ağır Hizmet Tipi Yüksük Tel Halat Yüksük
3-1/2" Heavy Duty Thimble for Wire Rope, rigging accessory, greater protection against wear and deformation of the wire rope eye Wire Rope attachment Product Description Our galvanized Heavy Duty Thimbles meet the performance requirements of Federal Specification FF-T-276B Type III. They are designed for use with high-performance wire rope, sized from 1/8" to 3-1/2". The thimble creates a 'hard' eye at wire rope ends, making it features greater protection against wear and
Galvanizli Çelik Halat Son Durdurucu Kapalı Spelter Soket 1 - 1/8"
1-1/8" Closed Spelter Socket,Closed Spelter Socket, End Fitting for Wire Rope, long-term durability Description The Closed Spelter Socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. Our Closed Spelter Socket is made in accordance with RR-S-550D requirements, and available for wire rope with a diameter from 1/4" to 5".
ASME B30.9 Açık Swage Soket Tel Halat Ucu Bağlantısı 0,5 İnç
1" Open Swage Socket (with cotter pin), End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description Open Swage Socket is an open type swage socket with a spring pin. The socket is forged from high tensile steel, while galvanization ensures its long-term durability. The Open Swage Socket is available for wire rope with a diameter from 6.35mm to 50.8mm. - Reference standard: ASME B30.9 - Our Swage Sockets are recommended used for wire ropes feature 6 x 19
EN 13411-3 Tel Halat İçin Alüminyum Yüksükler
TALUKON™ Ferrule Aluminum Ferrule, a conical ferrule made for sling application Product Description TALUKON™ is a conical ferrule made for sling application. It has an inspection hole to ensure the short end of the wire rope is correctly positioned after pressing. It also has a very tight fit compared to other conical ferrules on the market. The wire rope termination will not get caught during lifting and will simply slide of an obstacle. This will minimize the risk of
EN 13411-3 Yuvarlak Halat Uç Durdurucu 3.1 T ve TKH Yüksükler
3.1 T AND TKH FERRULES EUROPEAN STANDARD SYSTEM – EN 13411-3 Product Description 3.1 T AND TKH FERRULES TKH ferrule EUROPEAN STANDARD SYSTEM – EN 13411-3 GENERAL DESCRIPTION The aluminium ferrules, type T and type TKH correspond to the European standard for turnback ferrules (also known as ferrule secured eye terminations, FSET). The standard is EN 13411-3. The ferrule system is specified in Appendix 1. The ferrules are extruded seamlessly over mandrel and the aluminium alloy
Yuvarlak Alüminyum Alaşımlı Tel Halat Durdurucu 3.1 T / TKH Yüksükler
TALURIT® Round Aluminium End Stops made of Aluminium alloy not used for lifting MATCHING WIRE ROPE TO FERRULE Selection of the correct ferrule is to take account of: -The measured rope diameter -The rope type (and core) -The nominal fill factor, f (or metallic cross-sectional area factor, C) of the rope. Very important for fibre core ropes! Case 1 For single layer round strand ropes with fibre core and cable-laid ropes having a fill factor of at least 0,36 (C≥0,283) and max 0
Gümüş zinc kaplama tel ip durma korozyona dayanıklı 0.2 lbs Çeşitli endüstriler için
Product Description: Unbranded Wire Rope End Stop - Silver Cylindrical Finalizer for High Strength and Durable Wire Rope Fastener This Unbranded Wire Rope End Stop is an ideal choice for fastening and securing wire rope. Made of premium material, this wire rope fastener is highly durable and corrosion resistant, ensuring long-term use. Designed in a cylindrical shape, it is easy to install and has high strength, making it an excellent choice for wire rope end stop. It is the
G416 Galvanizli Açık Spelter Tel Halat Soketi ve Kamalı Pim – Yüksek Mukavemetli Arma Çözümü
Product Overview The G416 Galvanized Open Spelter Wire Rope Socket with Cotter Pin is a heavy-duty rigging component designed for secure wire rope terminations in lifting, marine, construction, and industrial applications. Featuring a hot-dip galvanized finish for superior corrosion resistance, this open spelter socket ensures reliable load-bearing performance while the integrated cotter pin provides added safety against accidental dislodgment. Key Features & Benefits 1.
