iso 9001 wire rope lifting slings
"
Kendinden Renkli 2 İnç 52mm Çelik Halat Yüksük
52mm Steel Thimble for Wire Rope, rigging accessory, greater protection against wear and deformation of rope eye Wire Rope attachment Product Description Our Solid Thimbles comply with GB/T 5974.2-2006 standards, and available for wire ropes sized from 8mm to 60mm. They are designed for making a 'hard' eye with wire rope, it creates a loop at wire rope ends. The thimbles provide a means for connecting wire rope to attachments. The thimbles are used to protect the eyes of
Açık Spelter Soketli 50mm Galvanizli Çelik Halat Askı Tertibatı
Spelter Socket (Open Type) Description 1. Reference standard: EN 13411-4: 2002 2. Safety Factor: 5:1. 3. The above metioned wire ropes feature 6 x 19 + IWRC, 6 x 37(a) + IWRC, 6 x 61 (a) + IWRC and 8 x 61 (a) + IWRC construction, with 1770 MPa in tensile strength. 4. The wire rope structure, tensile strength and working load limit could be customized upon request. Our Open Spelter Socket is also named as poured socket, equipped with cotter pin. Product Code Diameter(mm) WLL(T
EN 13411-4 Spelter Soketli Kapalı Tip Çelik Halat Sapan Tertibatı
Spelter Socket (Closed Type) Main features: 1. Reference standard: EN 13411-4: 2002 2. Safety Factor: 5:1. 3. The above metioned wire ropes feature6 x 19 + IWRC, 6 x 37 (a) + IWRC, 6 x 61 (a) + IWRC and 8 x 61 (a) + IWRC construction, with 1770 MPa in tensile strength. 4. The wire rope structure, tensile strength and working load limit could be customized upon request. Closed pelter socket also named as poured socket, with a hole that is made for a pin or bolt. They are made
ASME B30.9 Çelik Halat Sapan için Açık Tip Geçmeli Soket
Swage Socket Swage sockets are used with a swaging machine to terminate wire ropes. This type of socket is more resistant to wire fatigue at the point of connection between the socket and cable, but it does not always have as much break strength efficiency as a spelter socket. The swage socket is attached to the end of a wire rope sling by using a hydraulic machine and special dies. Our Open Swage Sockets and Closed Swage Sockets are forged from high tensile steel, while
Arma Aksesuarı 2 İnç FF-T-276B Tel Halat Yüksüğü
2" Heavy Duty Thimble for Wire Rope, rigging accessory, greater protection against wear and deformation of the wire rope eye Wire Rope attachment Description Our Heavy Duty Thimble is designed for use with high-performance wire rope. The thimble creates a 'hard' eye at wire rope ends, making it features greater protection against wear and deformation of the wire rope eye. Our thimbles meet the performance requirements of Federal Specification FF-T-276B Type III. The
Galvanizli Çelik 4-3/4" Halat Son Durdurucu, Kapalı Spelter Soket
4-3/4" - 5" Closed Spelter Socket, End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description Our Closed Spelter Socket is made in accordance with RR-S-550D (type B) requirements, and available for wire rope with a diameter from 1/4" to 5". The Closed Spelter Socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term
2-1/4" Hafif Çelik Ağır Hizmet Halat Yüksüğü
2-1/4" Heavy Duty Thimble for Wire Rope, rigging accessory, greater protection against wear and deformation of the wire rope eye Wire Rope attachment Description Our galvanized Heavy Duty Thimble provide smooth and even grooves, maximum strength in critical areas, and the proper bending radius for the rope. They are designed for use with high-performance wire rope. All of our thimbles meet the performance requirements of Federal Specification FF-T-276B Type III. The thimble
FF-T-276B 3.5 İnç Ağır Hizmet Tipi Yüksük Tel Halat Yüksük
3-1/2" Heavy Duty Thimble for Wire Rope, rigging accessory, greater protection against wear and deformation of the wire rope eye Wire Rope attachment Product Description Our galvanized Heavy Duty Thimbles meet the performance requirements of Federal Specification FF-T-276B Type III. They are designed for use with high-performance wire rope, sized from 1/8" to 3-1/2". The thimble creates a 'hard' eye at wire rope ends, making it features greater protection against wear and
Galvanizli Çelik Halat Son Durdurucu Kapalı Spelter Soket 1 - 1/8"
1-1/8" Closed Spelter Socket,Closed Spelter Socket, End Fitting for Wire Rope, long-term durability Description The Closed Spelter Socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. Our Closed Spelter Socket is made in accordance with RR-S-550D requirements, and available for wire rope with a diameter from 1/4" to 5".
