iso shackle bolt
"
32mm Kaldırma Zinciri Sapan
32mm Two-leg Grade 80 Alloy Steel Chain Sling, with Bolt Type Dee Shackles and Lifting Clamps, Chain Sling Assembly, for overhead lifting and industrial heavy lifting, high strength Two-leg Grade 80 Lifting Chain Sling (assembly) Product Overview Our Two-leg Chain Slings in Grade 80 have different load factors which are affected by the single leg angles, working load limited will also be different. They are proof tested to twice the WLL. The two-leg chain slings generally
Özelleştirilmiş Ağır Hizmet Gerdirme Çenesi ve Gözü WLL 2 Ton
3/4 x 6" Jaw & Eye galvanized Turnbuckle, open body, rigging accessories Jaw & Eye Turnbuckle Product Description Our galvanized Jaw & Eye type open body Turnbuckles are hot dip galvanized for durability and weather resistance. The forged jaw end is fitted with nuts & bolts. The other end has an elongated eye to maximize ease of attachment and minimize stress on the eye. Our turnbuckles comply with the requirements of ASTM F1145-92. They are intended to provide an adjustable
1-5/8" Tel Halat Sapan Takımı, 5:1 Kapalı Söndürme Soketi
1-5/8" Wire Rope Sling with Closed Spelter Socket, long-term durability Wire Rope Sling and Wire Rope End Fittings Description Closed spelter socket is a common type of socket. It has a hole that is made for a pin or bolt. Closed and open spelter socket also named as poured socket. Our Closed Spelter Socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization
3/8" Tel Halat Sapan Grubu, ASME B30.9 Kapalı Baskı Soketi
3/8" Wire Rope Sling with Closed Swage Socket, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description Swage sockets are used with a swaging machine to terminate wire ropes. This type of socket is more resistant to wire fatigue at the point of connection between the socket and cable, but it does not always have as much break strength efficiency as a spelter socket. The swage socket is attached to the end of a wire rope sling by using a hydraulic
EN 13411-4 Spelter Soketli Kapalı Tip Çelik Halat Sapan Tertibatı
Spelter Socket (Closed Type) Main features: 1. Reference standard: EN 13411-4: 2002 2. Safety Factor: 5:1. 3. The above metioned wire ropes feature6 x 19 + IWRC, 6 x 37 (a) + IWRC, 6 x 61 (a) + IWRC and 8 x 61 (a) + IWRC construction, with 1770 MPa in tensile strength. 4. The wire rope structure, tensile strength and working load limit could be customized upon request. Closed pelter socket also named as poured socket, with a hole that is made for a pin or bolt. They are made
