round webbing sling
"
Emniyet Vidalı Pimli Çelik Geniş Gövde Yaylı Kelepçe 1.25 İnç WLL 12 Ton
Tandard Bow Shackle with Safety Screw Pin Product Description The shackles have a large rounded shape that allows them to take loads from many directions without developing significant side load. - All screw pin shackles are quenched and tempered, with high quality carbon steel shackle bows and alloy steel pins. - Shackles bows are all hot dip galvanized, screws pins are painted yellow or customized upon request. - Meets or exceeds all requirements of ASME B30.26-2004 and RR
7/8 " WLL 6.5 Ton D Dükkan D Dükkan
7/8" Standard Dee Shackle with safety bolt, type JSB, WLL 6.5 tonne, Chain Shackle Bolt type Dee Shackles / Chain Shackles Product Description Our Bolt Type Dee Shackle is a standard dee shackle with a safety bolt, which is a more secure version used in rigging that features the combination of a bolt and nut located alongside a cotter pin. Dee Shackles, also referred to as Chain Shackles, which have a D-shaped bow that is narrower than Anchor / Bow Shackles. Dee shackles /
EN 13411-3 Yüksek Dereceli Bakır Tel Yüksükler
TALURIT® Copper Turnback Ferrule (TCU) used with stainless steel wire rope to avoid galvanic corrosion Product Description Copper ferrules are intended as an alternative to Stainless steel ferrules in high corrosive environments. The ferrule is to be used with stainless steel wire rope to avoid galvanic corrosion. The copper ferrule (TCU) is intended for stainless steel wire rope in corrosive environment. It is a good alternative to stainless steel ferrules is where there is
38mm Tel Halat Son Durdurma, Kamalı Pimli, Açık Spelter Soketli
Open Spelter Socket with cotter pin, 18mm in rope diameter, End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description Our Open Spelter Socket is equipped with cotter pin. They are made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. The Open Spelter Socket with cotter pin is available for wire rope with a
Özelleştirilmiş Kısa Yay Soketi EN 13411-4 Kapalı Spelter Soket Üreticisi
Short Bow Socket, Closed Spelter Socket, 66mm in rope diameter, End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Product Description Short Bow Socket is a closed spelter socket. They are produced according to EN 13411-4: 2002, RR-S-550D (type B) requirements. They are made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term
GB/T 5974.2 ISO 9001 32mm Masif Tel Halat Yüksüğü
32mm Solid Thimble for Wire Rope, rigging accessory, greater protection against wear and deformation of rope eye Wire Rope attachment Product Description Our Solid Thimbles are used to protect the eyes of cable and wire rope slings from abrasion by providing a solid steel barrier between the fragile cable strands and the other rigging fitting used in the connection. They are designed according to GB/T 5974.2-2006 standards for making a 'hard' eye with wire rope, it creates a
1-1/8" Tel Halat Son Durdurucu, Kapalı Spelter Soket
1-1/8" Closed Spelter Socket, End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description The Closed Spelter Socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. Our Closed Spelter Socket is made in accordance with RR-S-550D requirements, and available for wire rope with a diameter from 1/4" to 5".
ISO 9001 RR-S-550D 50mm 2'' Tel Halat Durdurucu
50mm Open Spelter Socket (with cotter pin), End Fittings for Wire Rope, long-term durability Wire Rope End Fittings Description Our Open Spelter Socket with cotter pin meets RR-S-550D (type A) requirements, and is available for wire rope with a diameter from 1/4" to 4". Our Open Spelter Socket is equipped with cotter pin. They are made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties,
Galvanizli Çelik 4-3/4" Halat Son Durdurucu, Kapalı Spelter Soket
4-3/4" - 5" Closed Spelter Socket, End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description Our Closed Spelter Socket is made in accordance with RR-S-550D (type B) requirements, and available for wire rope with a diameter from 1/4" to 5". The Closed Spelter Socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term
